Directions and Drawings
 
DIRECTIONS
  1. Cut out paneled sides 1f and 1b from 1/4” mahogany plywood.

    2. Refer to Cutting List # 1 & 2 & 19.
  2. Cut out bedsides 2f and 2b from 1/4” mahogany plywood.

    3. Refer to Cutting List #3 & 4 & 19.
  3. Rip 19 lineal feet of softwood (straight 2x4) to 3/4” x 3/4”.
  4. Using the 3/4” stock, cut glue block #16.

    5. Refer to Cutting List #20.
  5. Using the 3/4” stock, cut fourteen tread supports #T.

    6. Refer to Cutting List #21.
  6. Using the 3/4” stock, cut two tread supports #T1.

    7. Refer to Cutting List #22.
  7. Using the 3/4” stock, cut fourteen riser supports #R.

    8. Refer to Cutting List #23.
  8. Using the 3/4” stock, cut two riser supports #R1.

    9. Refer to Cutting List #24.
  9. Using the 3/4” stock, cut out six glue blocks #RGB

    10. Refer to Cutting List #25.
  10. Cut (8) plywood risers.

    11. Refer to Cutting List #11.

    (Please  EMAIL Hander Woodworking for complete directions)
     
 
 
 
PART NUMBER
  1. 1f      a) 19 9/16” x b) 8 1/8” x c) 9 3/8” x d) 31 7/8” x e) 21 1/4” x 1/4"

    2. Refer to Drawing 2
  2. 1b     a) 8 5/8” x b) 27” x c) 21 1/4” x d) 32 5/8 x e) 33” x 1/4”

    3. Refer to Drawing 2
  3. 2f     a) 19 9/16” x b) 8 1/8” x c) 9 3/8” x d) 31 7/8” x e) 21 1/4” x 1/4”

    4. Refer to Drawing 3
  4. 2b a) 11”x b) 23”x c) 21 1/4” x d) 32 5/8 x e) 32” x 1/4”

    5. Refer to Drawing 3
  5. 3b Skids (2)  33 1/4” x 1” x 1”

    6. Refer to Drawing 4
  6. 4b Stretcher Bar   10 1/4” x 2” x 3/4”

    7. Refer to Drawing 1
  7. 4f Stretcher Bar   10 1/4” x 2” x 3/4”

    8. Refer to Drawing 1
  8. 5 Back  32 3/8” x 11 1/16” x 3/4”

    9. Refer to Drawing 1
  9. 6 Hinge Mounts  191/8” x 1” x 1/2”

    10. Refer to Drawing 6
  10. 7 (2) 25 5/8’ X 1 1/2” X 3/8”  Capture Rails  Solid Mahogany

    11. Refer to Drawing1

    (Please  EMAIL Hander Woodworking for complete part numbers)
     
Photos
Home
Folding action